[Sls-rfm] Fw: Telemetry ranging input revision

[Enrico.Vassallo at esa.int]

For next session, Enrico
----- Forwarded by Enrico Vassallo/esoc/ESA on 11/04/2018 16:51 -----

From:   "Lee, Dennis K (332G)" <dennis.k.lee at jpl.nasa.gov>
To:     "Enrico.Vassallo at esa.int" <Enrico.Vassallo at esa.int>
Date:   11/04/2018 16:07
Subject:        RE: [Sls-rfm] Telemetry ranging input revision



Enrico,
 
I noticed some errors in the Table of my draft MSPA input document. Please 
use this version of input SLS-RFM_18-06.
 
Thanks,
Dennis
 
From: SLS-RFM [mailto:sls-rfm-bounces at mailman.ccsds.org] On Behalf Of 
Enrico.Vassallo at esa.int
Sent: Wednesday, April 11, 2018 3:51 AM
To: sls-rfm at mailman.ccsds.org
Subject: [Sls-rfm] Telemetry ranging input revision
 
Dear All, 

this is the input version for discussion today. Please find below also the 
reason for this last minute update. 

Regards, Enrico 


----- Forwarded by Enrico Vassallo/esoc/ESA on 11/04/2018 12:48 ----- 

From:        Jon Hamkins <Jon.Hamkins at jpl.caltech.edu> 
To:        "Enrico.Vassallo at esa.int" <Enrico.Vassallo at esa.int>, "
Massimo.Bertinelli at esa.int" <Massimo.Bertinelli at esa.int> 
Date:        11/04/2018 04:38 
Subject:        Ranging update 




Thank you for letting me know that I was working from an older telemetry 
ranging file.  I searched everywhere, and I could not find the file we 
edited at the Fall 2017 meeting.  Apparently, I had deleted it.  After a 
serious undertaking, I was able to recover it from a 5-month old back up 
of my laptop.

I have recreated my latest updates to this file, including all of the 
issues I am aware of from the minutes, yellow highlights we added at the 
meeting, and my notes -- e.g., suggested updates to figure 2, new 
footnotes, etc.  See attached.

     ----Jon
This message and any attachments are intended for the use of the addressee 
or addressees only.
The unauthorised disclosure, use, dissemination or copying (either in 
whole or in part) of its
content is not permitted.
If you received this message in error, please notify the sender and delete 
it from your system.
Emails can be altered and their integrity cannot be guaranteed by the 
sender.
 
Please consider the environment before printing this email.
 

This message and any attachments are intended for the use of the addressee or addressees only.
The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its
content is not permitted.
If you received this message in error, please notify the sender and delete it from your system.
Emails can be altered and their integrity cannot be guaranteed by the sender.

Please consider the environment before printing this email.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.ccsds.org/pipermail/sls-rfm/attachments/20180411/cc2f9f2b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SLS-RFM_18-06 Flexible Transponder Turnaround Ratios for MSPA v1.docx
Type: application/octet-stream
Size: 28016 bytes
Desc: not available
URL: <http://mailman.ccsds.org/pipermail/sls-rfm/attachments/20180411/cc2f9f2b/attachment.obj>