AW: [CMC] CCSDS SLS/C&S WG deputy-chair candidate(s)

osvaldo.peinado at dlr.de osvaldo.peinado at dlr.de
Mon Oct 19 13:18:33 UTC 2015


Dear Gian Paolo
There is not candidates from DLR for this position
Best Regards
Osvaldo


Von: cmc-bounces at mailman.ccsds.org [mailto:cmc-bounces at mailman.ccsds.org] Im Auftrag von Gian.Paolo.Calzolari at esa.int
Gesendet: Montag, 19. Oktober 2015 14:03
An: CMC
Betreff: [CMC] CCSDS SLS/C&S WG deputy-chair candidate(s)

Dear CMC Members,
        please consider that SLS-C&S WG has identified a suitable candidate - supported by NASA - for the Deputy Chair position.
Can other Agency Representative provide additional proposed candidates, if any.

Provision of input by  29 October COB is required for efficient planning of the Fall 2015 meetings in Darmstadt.

Thank you all and best regards

Gian Paolo Calzolari
SLS Area Director


----- Forwarded by Gian Paolo Calzolari/esoc/ESA on 19/10/2015 13:59 -----

From:        Massimo Bertinelli/estec/ESA
To:        Gian Paolo Calzolari/esoc/ESA at ESA, Nestor Peccia/esoc/ESA at ESA
Cc:        "Andrews, Kenneth S (332B)" <kenneth.s.andrews at jpl.nasa.gov<mailto:kenneth.s.andrews at jpl.nasa.gov>>, "Hamkins, Jon (JPL-3320)[Jet Propulsion Laboratory]" <jon.hamkins at jpl.nasa.gov<mailto:jon.hamkins at jpl.nasa.gov>>, "Gilles Moury" <Gilles.Moury at cnes.fr<mailto:Gilles.Moury at cnes.fr>>
Date:        19/10/2015 13:54
Subject:        CCSDS C&S WG deputy-chair
________________________________


Dear Gian Paolo and Nestor,

following the Pasadena meeting and subsequent discussions, Ken Andrews (NASA/JPL) has accepted to be deputy-chair for the C&S WG.
I would like to formalize this at the Darmstadt meeting.
Given Ken's  expertise in the coding area, such a choice should be easily acceptable by all other WG members.
Nevertheless, I understand that CCSDS rules require a verification at CESG (also CMC?) level, to poll other Agencies in case they would like to propose different candidates.
May I please ask you to bring this point to CESG (CMC?) so that we can proceed?

Best regards,
Massimo

---------------------------------------------------
Massimo Bertinelli
Communication Systems Engineer
ESA/Estec

Tel. +31 (0)71 5653435
--------------------------------------------------

This message and any attachments are intended for the use of the addressee or addressees only.

The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its

content is not permitted.

If you received this message in error, please notify the sender and delete it from your system.

Emails can be altered and their integrity cannot be guaranteed by the sender.



Please consider the environment before printing this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.ccsds.org/pipermail/cmc/attachments/20151019/7866f262/attachment.html>


More information about the CMC mailing list