[Sls-mhdc] MHDCA-1810-5 review CCSDS-121.0-B-3 draft

[Roberto.Camarero at esa.int]

Dear working group,

As promised in my previous email, you will find below the link for the 
survey including the list of questions intended for the implementers of 
the 121.0-B-2 (this should also include all the 123.0 implementers).

https://fr.surveymonkey.com/r/TKQGZMZ


Please take a look and let me know if you think something is missing or if 
the questions should be different.

I'd like to start spreading the survey beginning of next week so that we 
can compile all the answers before the spring meeting.

Kind regards,


Roberto

ESA – European Space Agency
Roberto Camarero
On-board Payload Data Processing Engineer
TEC-EDP / Electrical Engineering Department
ESTEC
Keplerlaan 1, PO box 299, 
NL-2200 AG Noordwijk, The Netherlands
roberto.camarero at esa.int | www.esa.int/TEC/OBDP/
T +31 71 56 53508 | F +31 71 56 56791 | Room: Na308




From:   Roberto.Camarero at esa.int
To:     "sls-mhdc at mailman.ccsds.org" <sls-mhdc at mailman.ccsds.org>
Date:   04/04/2019 06:27 PM
Subject:        [Sls-mhdc] MHDCA-1810-5 review CCSDS-121.0-B-3 draft
Sent by:        "SLS-MHDC" <sls-mhdc-bounces at mailman.ccsds.org>



Dear working group, 

As for MHDCA-1810-5 (d) "follow-up with current implementers", we are 
preparing a list of questions for implementers about the choices they made 
for the parts that looked ambiguous in the standard (and that we are 
planing to clarify in the B-3). 

So, we have been through the document again and we have identified several 
issues that still seem to be open to interpretation, even in the revised 
document submitted in November (MHDCA-1810-5 (a)). 

Could you please review the marked-up draft in "CWE 
Private\121.0-B-3-DRAFT\121x0b3-DRAFT-2019_04_04_ESA_comments.docx" so 
that we can reach consensus during the next meeting? (the plan is to take 
also into account the answers from implementers). 


Thank you for your help & see you next month, 

Kind regards, 

Roberto 



ESA – European Space Agency 
Roberto Camarero 
On-board Payload Data Processing Engineer
TEC-EDP / Electrical Engineering Department 
ESTEC
Keplerlaan 1, PO box 299, 
NL-2200 AG Noordwijk, The Netherlands
roberto.camarero at esa.int | www.esa.int/TEC/OBDP/
T +31 71 56 53508 | F +31 71 56 56791 | Room: Na308 
This message is intended only for the recipient(s) named above. It may 
contain proprietary information and/or
protected content. Any unauthorised disclosure, use, retention or 
dissemination is prohibited. If you have received
this e-mail in error, please notify the sender immediately. ESA applies 
appropriate organisational measures to protect
personal data, in case of data privacy queries, please contact the ESA 
Data Protection Officer (dpo at esa.int).

_______________________________________________
SLS-MHDC mailing list
SLS-MHDC at mailman.ccsds.org
https://mailman.ccsds.org/cgi-bin/mailman/listinfo/sls-mhdc




This message is intended only for the recipient(s) named above. It may contain proprietary information and/or
protected content. Any unauthorised disclosure, use, retention or dissemination is prohibited. If you have received
this e-mail in error, please notify the sender immediately. ESA applies appropriate organisational measures to protect
personal data, in case of data privacy queries, please contact the ESA Data Protection Officer (dpo at esa.int).

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.ccsds.org/pipermail/sls-mhdc/attachments/20190418/9f4ef242/attachment.html>