[Css-csts] "START" typo? (Framework book)

[Ray, Timothy J. (GSFC-583.0)]

Dear Yves,

Yes, that solves the issue (sorry, I misinterpreted the 'note').

Thanks,
Tim


-----Original Message-----
From: Yves.Doat at esa.int [mailto:Yves.Doat at esa.int] 
Sent: Tuesday, September 16, 2008 11:17 AM
To: Ray, Timothy J. (GSFC-583.0)
Cc: css-csts at mailman.ccsds.org; css-csts-bounces at mailman.ccsds.org
Subject: Re: [Css-csts] "START" typo? (Framework book)

Dear Tim,
I looked at the text and here is what I found:

The note you refer to states:
"Apart from the start and stop production time that are included in the
START
operation, the specification of the selection criteria's of the data
depends
on the specific service and is not defined by this procedure".

The generic start (Table 3.7-1) do not extend the START operation.
The Buffered Data Delivery procedure (Table 4.4-2 START Extension
Parameter)
gives the following two extension parameters: start-generation-time and
stop-generation-time.

At some times, we agreed not to have extension parameters in the generic
START as the start and stop time depends on the procedures or the
services.
E.g. not all procedures need a start and stop time. As an example the
Unbuffered Data Delivery procedure does not need a start and a stop
time.

I will update the text of the note replacing "production time" by
"generation
time" so that the text is in line with the START extension parameters of
the
Buffered Data Delivery procedure.

Please let me know that answer solves the issue. If not, I will make
sure we
address it during the Berlin meeting.

Best regards

Yves DOAT
__________________________________________________
Head of the Stations and M&C Integration Section (OPS-GSI)
ESA/ESOC Robert-Bosch Strasse 5
D-64293 Darmstadt, Germany
Tel.: +49 (6151) 90.2288               Fax:+49 (6151) 90.3046
Internet: http://www.esa.int/
__________________________________________________



 

             "Ray, Timothy J.

             (GSFC-583.0)"

             <timothy.j.ray at nas
To 
             a.gov>                     <css-csts at mailman.ccsds.org>

             Sent by:
cc 
             css-csts-bounces at m

             ailman.ccsds.org
Subject 
                                        [Css-csts] "START" typo?
(Framework  
                                        book)

             15/09/2008 22:06

 

 

 

 

 





Dear WG members,

For possible discussion in Berlin:

In the Framework spec (August 2008), a note at the top of page 4-59
explains
that the Buffered Data Delivery procedure does not add any parameters to
the
generic START operation:
"Apart from the start and stop production time that are included in the
START
operation..."

But on page 3-36, table 3.7-1 (that shows the START operation
parameters)
includes only the Standard Operation Header (confirmed).

Perhaps 'start-production-time' and 'stop-production-time' should be
added to
the START operation?  (maybe they were accidentally removed)?

Best regards,
Tim
 _______________________________________________
Css-csts mailing list
Css-csts at mailman.ccsds.org
http://mailman.ccsds.org/cgi-bin/mailman/listinfo/css-csts