[Sois-app] Green book review comments
Felice.Torelli at esa.int
Felice.Torelli at esa.int
Fri Feb 27 19:45:20 UTC 2015
Hi Ray,
I had no intention to limit the debate, indeed I was suggesting to resolve by email the easy comments, so that when we will meet (face to face or in teleconference) we can focus on the most important ones. :-)
Cheers,
Felice.
Inviato da iPad
> Il giorno 27 feb. 2015, alle ore 19:30, Ramon Krosley <r.krosley at andropogon.org> ha scritto:
>
> In response to Felice's diplomatic request for less spam, I'll move this discussion offline. If you are interested to follow the discussion, then please send me an email.
>
> On February 27, 2015 02:56 MST, "Richard Melvin" <Richard.Melvin at scisys.co.uk> wrote:
>
> Comments inline.
>
>
>
> From: Ramon Krosley [mailto:r.krosley at andropogon.org]
> Sent: 27 February 2015 01:06
> To: Richard Melvin
> Cc: sois-app at mailman.ccsds.org
> Subject: Re: [Sois-app] Green book review comments
>
>
>
> Well, I still haven't developed the skills for using a touch screen. Sorry for this additional spam, but the editing that I was doing in the ISO procedural mapping below is complete in this version. You can delete the preceding version.
>
>
> On February 26, 2015 17:53 MST, "Ramon Krosley" <r.krosley at andropogon.org> wrote:
>
>
>
> Here is the latest version of how I think that the EDS parameters, commands, activities, and state machines can map onto an ISO protocol view.
>
> A device EDS represents presentation layer talking to top of subnet layer. The data exchanged through that service access point is a service data unit (SDU). It is also a protocol data unit that is the same as is seen by the device, so we should be able to describe the messages used by the device in this view.
>
> A parameter in an EDS represents an unacknowledged transfer. A command represents an acknowledged transfer.
>
>
>
> This is not quite right; see green book p3.9.
>
>
>
> This is an area that confuses enough peopkle I’d definitely like to rework it, to parameter/command/event
>
>
>
> In the following sequences, the steps in parentheses are not described in a device EDS; the others are described.
> Here is the sequence of events for the transfer of a parameter with sync=true:
> DAS activity:
> block on parameter sink primitive
> (device activity:)
> (compute request SDU)
> (send request by parameter source primitive)
> (DAS state machine:)
> (indication causes transition, unblocking parameter sink primitive?)
> DAS activity:
> read parameter, which is indication SDU, by parameter sink primitive resumed
>
>
> That’s definitely wrong, there is never any blocking. Again, see p3.9.
>
>
>
>
> Here is the sequence of events for the transfer of a parameter with sync=false:
> (device activity:)
> (compute request SDU)
> (send request by parameter source primitive)
> DAS state machine:
> indication causes transition, starting activity
> DAS activity:
> read parameter, which is indication SDU, by parameter sink primitive
>
>
>
> That’s actually how it works for sync=true. ‘sync’ just means you don’t get a reply unless you asked for one (I didn’t come up with the names).
>
>
>
> Here is the sequence of events for a command with sync=true:
> The command has only one argument which is the request SDU, and only one which is the response SDU.
> DAS activity:
> compute argument-in, which is request SDU
> send request by command source primitive
> block here
> (device state machine:)
> (indication causes transition, starting activity)
> (device activity:)
> (read argument-in, which is indication SDU)
> (compute response)
> (set argument-out, which is response SDU)
> (send response by command sink primitive)
> (DAS state machine:)
> (confirmation causes transition, unblocking command source primitive?)
> DAS activity:
> read argument-out, which is confirmation SDU, by command source primitive resumed
>
> Here is the sequence of events for a command with sync=false:
> The command has only one argument which is the request SDU, and only one which is the response SDU.
> DAS activity 1:
> compute argument-in, which is request SDU
> send request by command source primitive
> (device state machine:)
> (indication causes transition, starting activity)
> (device activity:)
> (read argument-in, which is indication SDU)
> (compute response)
> (set argument-out, which is response SDU)
> (send response by command sink primitive)
> DAS state machine:
> confirmation causes transition, starting activity 2
> DAS activity 2:
> read argument-out, which is confirmation SDU, by command source primitive
> ---------------
>
> On February 26, 2015 09:20 MST, "Ramon Krosley" <r.krosley at andropogon.org> wrote:
>
>
> Thanks, Richard,
>
> These are good comments. I'll review these in detail this weekend, but to keep the dialog rolling, here are some preliminary replies.
>
> I think that the most important of these comments are the ones concerning how to interpret EDS constructions as behavior; these need discussion to establish what they mean. For example, the mappings seem to imply that values are copied between variables and interface data items, but when does that copying occur? Also, the purpose served by the copying needs discussion, if copying is indeed the correct interpretation of the mapping. There are two forms of mapping, one of which (ParameterMapSet) I used because I could guess what it might do, and the other (ParameterActivityMapSet) I'm still uncertain about. I think that the mappings are probably good things, because they help to make behavior more declarative, and therefore more independent of implementation. However, we need to say what is the implication of the declarative form.
>
> In general, where the examples don't validate against the schema, that represents the question, "How can I do this?". So in those cases we'll need to discuss whether it should be done, and how to do it. For example, the multiple devices seem to be necessary in an EDS that is a composite of other EDS's, as would be the case inside the onion.
>
> The XAML is a microsoft declarative language for describing object trees, which is typically used in describing GUI layout. I should be more generic about that and include HTML/CSS perhaps, or just say "GUI layout files".
>
> I agree with footnoting the namespace distinction.
>
> The foundation namespace was made to be a small thing that could be presented all at once, so a reader could get the feel for the larger SEDS file. Also, I'm not sure that everyone will factor their concepts in the way that is provided by the SEDS file, so the foundation namespace suggests some freedom of expression. I should refer to the SEDS file in the same context, nevertheless.
>
> The arguments of commands need discussion in relation to the representation of those commands when they are sent to a device. I believe that a datasheet should be clear about that format, but commands with arguments seem to deny expression of this information.
>
> Ramon
>
>
>
> On February 26, 2015 07:47 MST, "Richard Melvin" <Richard.Melvin at scisys.co.uk> wrote:
>
>
>
> P4-18: on the ground, calibrations are typically done by configuring the ground software with a calibration table, not extending/implementing it. Suggest a slight rewording.
>
>
>
> P4-19: XAML -> XML, presumably.
>
>
>
> P4-23: I think the conclusion to be expressed here is that you need:
>
> · Standardised interfaces for core functionality that will be acted on directly by software, especially onboard (e.g. AOCS).
>
> · Device-specific interfaces for information that will be interpreted by humans, or simple operator-created rules, for diagnostics and monitoring.
>
>
>
> The key point about space hardware is that everything you might need to know about the device needs to be available through the data interface; you can’t just go up and see if the fault light is blinking.
>
>
>
> Which means you can’t standardise the latter without removing all leeway in how to build a device. Which is ultimately why you need a device datasheet in the first place.
>
>
>
> P5-29: did you manage to validate the sample datasheet using the tooling? There are a few things in the examples I wouldn’t have thought were valid, and, if they are, perhaps shouldn’t be.
>
>
>
> P5-29: readability would probably be improved by making the point about xml versus EDS namespaces a footnote.
>
>
>
> P5-32: I don’t think it is right (although it is legal in schema; see P5-29) that an argument have an encoding. Arguments should only have ranges. Arguments never get encoded as they are passed over an interface, they just get restricted to be within range; the semantics are like a function call not a message exchange.
>
> You can get the same effect with IntegerBitsRangeType with numberOfBits = 8; this is just a shorthand for [0-255], without the option to set the byte order or anything.
>
>
>
> P5-33: I think the ‘foundation’ namespace duplicates/overlaps the existing ‘SEDS’ one (in github). There probably should be one such, delivered alongside the standard (although I don’t see that it need to be standardised itself).
>
>
>
> P5-35: needs reorganisation, segmentation should perhaps be it’s own topic (saying ‘not implemented’), not an aside.
>
>
>
> P5-44: The idea of ‘distribution’ of calibrations is new, and maybe unnecessary. You can get the same effect by definining the calibration activity with an argument and using Iteration/overArray to call it on each element.
>
>
>
> P5-45: per previous discussions, I think the idea of the flag is good, but the name ‘native’ is misleading. Interfaces are always going up/down the OSI protocol stack, so I suggest OSI terminology like SDU or just dataUnit.
>
>
>
> P5-54: maybe change ‘The namespaces in an EDS’ to ‘Semantics tags within the body of an EDS’ or similar.
>
>
>
> P5-56: change example to get rid of multiple devices per datasheet, and the ‘Connect’ element? Such things should probably be in some other, rather more complicated and probably mission-specific schema or model. One way of doing that would be to define a new top-level schema that allowed Xincluding devices and namespaces.
>
>
>
> P5-57: not sure about the example mapping two different interface parameters to the same local variable; by the red book definition, I think this would send values read from the device back out to it. Should either change schema to allow direct mapping of parameters between interfaces, or example to use state machine and activities for at least one of the interfaces.
>
>
>
> Perhaps worth a warning from the tooling if the same variable is used by two or more parameter-maps, as I can’t see that ever working out.
>
>
>
> P5-58: the state machine ‘read-attitude’ seems to be concerned with setting, not acquiring, data. Definitely needs a state diagram to show what is going on (the tooling can produce these), I am not at all convined it is right.
>
>
>
> P5-46
>
> From the point of view of a state machine, it is a _sink_ to parameters/commands that trigger transisitons, and a _source_ of parameters/commands generated by activities. What that actually means is different for required and provided interfaces.
>
>
>
> That info probably belongs in the current section 3.7, i.e. under common concepts.
>
>
>
> P5-58 S2: I’d agree that doesn’t belong here, will make document too long.
>
>
>
> richard
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> SCISYS UK Limited. Registered in England and Wales No. 4373530.
>
> Registered Office: Methuen Park, Chippenham, Wiltshire SN14 0GB, UK.
>
>
>
> Before printing, please think about the environment.
>
>
>
>
>
> _______________________________________________
> Sois-app mailing list
> Sois-app at mailman.ccsds.org
> http://mailman.ccsds.org/cgi-bin/mailman/listinfo/sois-app
>
>
>
>
> _______________________________________________
> Sois-app mailing list
> Sois-app at mailman.ccsds.org
> http://mailman.ccsds.org/cgi-bin/mailman/listinfo/sois-app
>
>
>
>
>
> _______________________________________________
> Sois-app mailing list
> Sois-app at mailman.ccsds.org
> http://mailman.ccsds.org/cgi-bin/mailman/listinfo/sois-app
This message and any attachments are intended for the use of the addressee or addressees only.
The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its
content is not permitted.
If you received this message in error, please notify the sender and delete it from your system.
Emails can be altered and their integrity cannot be guaranteed by the sender.
Please consider the environment before printing this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.ccsds.org/pipermail/sois-app/attachments/20150227/953597fe/attachment.html>
More information about the SOIS-APP
mailing list