[Moims-sc] Mission Operations - MAL Binding to TCP/IP Transport and Split Binary Encoding

[Sam Cooper]

Dear All,

 

Just a quick comment on this protocol mapping that has come out during
prototyping.

 

It would make sense to move the body length field closer to the start of
the encoded header as you need to read this before you can read the rest
of the packet. 

 

Cheers,

Sam.

 

 

From: moims-sc-bounces at mailman.ccsds.org
[mailto:moims-sc-bounces at mailman.ccsds.org] On Behalf Of
Mehran.Sarkarati at esa.int
Sent: 06 August 2015 11:13
To: Smith, Danford S. (GSFC-5800)
Cc: moims-sc-bounces at mailman.ccsds.org; moims-sc at mailman.ccsds.org
Subject: [Moims-sc] Mission Operations - MAL Binding to TCP/IP Transport
and Split Binary Encoding

 

Dear SM&C WG members, 

As discussed during the web-ex on 28 July, please find attached the
draft version of the "Mission Operations - MAL Binding to TCP/IP
Transport and Split Binary Encoding" for your review. 
TCP/IP binding is a relatively simple binding. It basically puts all the
MAL header and body in the TCP payload part and uses the ip and tcp
header only for addressing (URIFrom and URITo). 
I would appreciate if you could let me have your comments before end of
September. 

There is an implementation of the MAL tcp/ip binding available on the
ESA account on GitHub: https://github.com/esa <https://github.com/esa>
(Please note that we will slightly re-factor this implementation in the
coming days). 
In order to produce the corresponding yellow book, we need to have two
prototypes. In view of the fact that this is probably one of the easiest
bindings, I would like to ask if one of the participating agencies could
volunteer to do the second prototype? 

Kind Regards 
Mehran 

This message and any attachments are intended for the use of the
addressee or addressees only.
The unauthorised disclosure, use, dissemination or copying (either in
whole or in part) of its
content is not permitted.
If you received this message in error, please notify the sender and
delete it from your system.
Emails can be altered and their integrity cannot be guaranteed by the
sender.
 
Please consider the environment before printing this email.


SCISYS UK Limited. Registered in England and Wales No. 4373530.
Registered Office: Methuen Park, Chippenham, Wiltshire SN14 0GB, UK.
 
Before printing, please think about the environment.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.ccsds.org/pipermail/moims-sc/attachments/20150818/e301b39c/attachment.html>