<font size=2 face="sans-serif">Peter,</font>
<br><font size=2 face="sans-serif">        your
assumptions are wrong.</font>
<br><font size=2 face="sans-serif">The approved projects is for Magenta
Book that will address the various solutions defined in other Blue Books.</font>
<br><font size=2 face="sans-serif">The approach fro Magenta was confirmed
by WG consensus (if I am not wrong, but Massimo can correct me) in London
at Fall 2014 Meeting.</font>
<br><font size=2 face="sans-serif">In one thing you are corrects: the only
solutions available in blue books are nowadays SCCC and DVB-S2 and this
is not an ESA and/or CNES fault.</font>
<br>
<br><font size=2 face="sans-serif">Regards</font>
<br>
<br><font size=2 face="sans-serif">Gian Paolo</font>
<br>
<br>
<br>
<br><font size=1 color=#5f5f5f face="sans-serif">From:      
 </font><font size=1 face="sans-serif">"Shames, Peter
M (312B)" <peter.m.shames@jpl.nasa.gov></font>
<br><font size=1 color=#5f5f5f face="sans-serif">To:      
 </font><font size=1 face="sans-serif">"Massimo.Bertinelli@esa.int"
<Massimo.Bertinelli@esa.int>, "Enrico.Vassallo@esa.int"
<Enrico.Vassallo@esa.int></font>
<br><font size=1 color=#5f5f5f face="sans-serif">Cc:      
 </font><font size=1 face="sans-serif">"Bernard L. Edwards"
<Bernard.L.Edwards@nasa.gov>, "CCSDS CESG --" <cesg@mailman.ccsds.org>,
"Lee, Dennis K (332G)" <dennis.k.lee@jpl.nasa.gov>, "Gian.Paolo.Calzolari@esa.int"
<Gian.Paolo.Calzolari@esa.int>, "Andrews, Kenneth S (332B)"
<kenneth.s.andrews@jpl.nasa.gov>, "Klaus-Juergen.Schulz@esa.int"
<Klaus-Juergen.Schulz@esa.int>, "Nestor.Peccia@esa.int"
<Nestor.Peccia@esa.int></font>
<br><font size=1 color=#5f5f5f face="sans-serif">Date:      
 </font><font size=1 face="sans-serif">06/09/2017 17:16</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Subject:    
   </font><font size=1 face="sans-serif">Re: [CESG] CESG
polls stucked with ADs/DADs conditions</font>
<br>
<hr noshade>
<br>
<br>
<br><font size=2 face="Calibri">Ciao Massimo and Enrico,</font>
<br><font size=2 face="Calibri"> </font>
<br><font size=2 face="Calibri">Since the other "approaches",
namely SCCC and DVB are already published, and include documented VCM features,
publishing another document that just points at those two corner cases
does not appear to add much value.</font>
<br><font size=2 face="Calibri"> </font>
<br><font size=2 face="Calibri">As I understood it the whole point of this
document was to publish a clearly documented VCM approach that would work
across all of the CCSDS coding and modulation standards.  This would
be derivative from the other two (somewhat different) "approaches",
but would be of value largely because it provided some integrated set of
VCM features for the other CCSDS codes and modulations that were not otherwise
served by the closed SCCC and DVB approaches.</font>
<br><font size=2 face="Calibri"> </font>
<br><font size=2 face="Calibri">I really do not see much value in publishing
a book that does not clearly document how this is to be done.  Given
the SCCC and DVB examples I doubt that this is a huge amount of work, and
I do think it of potential value to the rest of the CCSDS community.</font>
<br><font size=2 face="Calibri"> </font>
<br><font size=2 face="Calibri">I thought that was the approach that was
agreed to, but do understand that there may be a delay in publishing the
document while that needed work gets done.  I think that a much better
outcome than just publishing a book that points to DVB and SCCC as the
only ways to accomplish this.</font>
<br><font size=2 face="Calibri"> </font>
<br><font size=2 face="Calibri">Best regards, Peter</font>
<br><font size=2 face="Calibri"> </font>
<br><font size=2 face="Calibri"> </font>
<br><font size=3 face="Calibri"><b>From: </b>"Massimo.Bertinelli@esa.int"
<Massimo.Bertinelli@esa.int><b><br>
Date: </b>Wednesday, September 6, 2017 at 12:12 AM<b><br>
To: </b>"Enrico.Vassallo@esa.int" <Enrico.Vassallo@esa.int><b><br>
Cc: </b>Bernie Edwards <Bernard.L.Edwards@nasa.gov>, CCSDS Engineering
Steering Group - CESG Exec <cesg@mailman.ccsds.org>, Dennis K Lee
<dennis.k.lee@jpl.nasa.gov>, Gian Paolo Calzolari <Gian.Paolo.Calzolari@esa.int>,
Kenneth Andrews <kenneth.s.andrews@jpl.nasa.gov>, Klaus-Juergen Schulz
<Klaus-Juergen.Schulz@esa.int>, Nestor Peccia <Nestor.Peccia@esa.int>,
Peter Shames <peter.m.shames@jpl.nasa.gov><b><br>
Subject: </b>Re: [CESG] CESG polls stucked with ADs/DADs conditions</font>
<br><font size=2 face="Calibri"> </font>
<br><font size=2 face="sans-serif">Thank you Enrico,</font><font size=2 face="Calibri">
<br>
</font><font size=2 face="sans-serif"><br>
I think your summary captures very well the current situation.  </font><font size=2 face="Calibri">
<br>
</font><font size=2 face="sans-serif"><br>
Best regards,</font><font size=2 face="Calibri"> </font><font size=2 face="sans-serif"><br>
Massimo</font><font size=2 face="Calibri"> </font><font size=2 face="sans-serif"><br>
<br>
<br>
---------------------------------------------------<br>
Massimo Bertinelli<br>
Communication Systems Engineer<br>
ESA/Estec<br>
<br>
Tel. +31 (0)71 5653435<br>
--------------------------------------------------</font><font size=2 face="Calibri">
<br>
<br>
<br>
</font><font size=1 color=#5f5f5f face="sans-serif"><br>
From:        </font><font size=1 face="sans-serif">Enrico
Vassallo/esoc/ESA</font><font size=2 face="Calibri"> </font><font size=1 color=#5f5f5f face="sans-serif"><br>
To:        </font><font size=1 face="sans-serif">"Shames,
Peter M (312B)" <peter.m.shames@jpl.nasa.gov></font><font size=2 face="Calibri">
</font><font size=1 color=#5f5f5f face="sans-serif"><br>
Cc:        </font><font size=1 face="sans-serif">Gian
Paolo Calzolari/esoc/ESA@ESA, Nestor Peccia/esoc/ESA@ESA, Massimo Bertinelli/estec/ESA@ESA,
"Andrews, Kenneth S (332B)" <kenneth.s.andrews@jpl.nasa.gov>,
Klaus-Juergen Schulz/esoc/ESA@ESA, "Bernard L. Edwards" <Bernard.L.Edwards@nasa.gov>,
"CCSDS CESG --" <cesg@mailman.ccsds.org>, "Lee, Dennis
K (332G)" <dennis.k.lee@jpl.nasa.gov></font><font size=2 face="Calibri">
</font><font size=1 color=#5f5f5f face="sans-serif"><br>
Date:        </font><font size=1 face="sans-serif">09/06/2017
03:33 AM</font><font size=2 face="Calibri"> </font><font size=1 color=#5f5f5f face="sans-serif"><br>
Subject:        </font><font size=1 face="sans-serif">Re:
[CESG] CESG polls stucked with ADs/DADs conditions</font><font size=2 face="Calibri">
</font>
<div align=center>
<hr noshade></div>
<br><font size=2 face="Calibri"><br>
<br>
</font><font size=3 face="Calibri"><br>
Peter,</font><font size=2 face="Calibri"> <br>
</font><font size=3 face="Calibri"><br>
Let me intervene in this discussion as a concerned party. The book deals
with 3 systems, two of which are well specified and one (the NASA option)
just needs some extra work by NASA at least since both ESA and CNES will
use their own system and have no resources to study another option. The
two groups involved (C&S had the lead over RFM) thought it would be
good to publish the book so as to get VCM available for these two systems
at least. Another option would be to remove the NASA system now, publish
the book with 2 systems, and when the NASA system is ready update the book.</font><font size=2 face="Calibri">
</font><font size=3 face="Calibri"><br>
Let me know if this would work for you.</font><font size=2 face="Calibri">
<br>
</font><font size=3 face="Calibri"><br>
I hope I have covered correctly the views of the C&S WG.</font><font size=2 face="Calibri"><br>
</font><font size=3 face="Calibri"><br>
Enrico's phone</font><font size=2 face="Calibri"> <br>
</font><font size=3 face="Calibri"><br>
<br>
On Sep 5, 2017, at 23:57, Shames, Peter M (312B) <</font><a href=mailto:peter.m.shames@jpl.nasa.gov><font size=3 color=blue face="Calibri"><u>peter.m.shames@jpl.nasa.gov</u></font></a><font size=3 face="Calibri">>
wrote:</font><font size=2 face="Calibri"><br>
</font><font size=2 face="Calibri"><br>
Gippo,</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Putting forward documents that are clearly incomplete, and even say so,
is a waste of all of our time.  If you wish to believe that I am "the
bad guy" and reject this, that's fine.  </font><font size=2 face="Calibri">
</font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
But please, all of you who had a roll in sending this forward in an incomplete
state are really the ones who bear the responsibility for this problem,
not me.</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Regards, Peter</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=3 face="Calibri"><b><br>
From: </b>Gian Paolo Calzolari <</font><a href=mailto:Gian.Paolo.Calzolari@esa.int><font size=3 color=blue face="Calibri"><u>Gian.Paolo.Calzolari@esa.int</u></font></a><font size=3 face="Calibri">><b><br>
Date: </b>Tuesday, September 5, 2017 at 2:31 PM<b><br>
To: </b>Peter Shames <</font><a href=mailto:peter.m.shames@jpl.nasa.gov><font size=3 color=blue face="Calibri"><u>peter.m.shames@jpl.nasa.gov</u></font></a><font size=3 face="Calibri">><b><br>
Cc: </b>Nestor Peccia <</font><a href=mailto:Nestor.Peccia@esa.int><font size=3 color=blue face="Calibri"><u>Nestor.Peccia@esa.int</u></font></a><font size=3 face="Calibri">>,
"</font><a href=mailto:Massimo.Bertinelli@esa.int><font size=3 color=blue face="Calibri"><u>Massimo.Bertinelli@esa.int</u></font></a><font size=3 face="Calibri">"
<</font><a href=mailto:Massimo.Bertinelli@esa.int><font size=3 color=blue face="Calibri"><u>Massimo.Bertinelli@esa.int</u></font></a><font size=3 face="Calibri">>,
Kenneth Andrews <</font><a href=mailto:kenneth.s.andrews@jpl.nasa.gov><font size=3 color=blue face="Calibri"><u>kenneth.s.andrews@jpl.nasa.gov</u></font></a><font size=3 face="Calibri">>,
Klaus-Juergen Schulz <</font><a href="mailto:Klaus-Juergen.Schulz@esa.int"><font size=3 color=blue face="Calibri"><u>Klaus-Juergen.Schulz@esa.int</u></font></a><font size=3 face="Calibri">>,
Bernie Edwards <</font><a href=mailto:Bernard.L.Edwards@nasa.gov><font size=3 color=blue face="Calibri"><u>Bernard.L.Edwards@nasa.gov</u></font></a><font size=3 face="Calibri">>,
CCSDS Engineering Steering Group - CESG Exec <</font><a href=mailto:cesg@mailman.ccsds.org><font size=3 color=blue face="Calibri"><u>cesg@mailman.ccsds.org</u></font></a><font size=3 face="Calibri">>,
"</font><a href=mailto:Enrico.Vassallo@esa.int><font size=3 color=blue face="Calibri"><u>Enrico.Vassallo@esa.int</u></font></a><font size=3 face="Calibri">"
<</font><a href=mailto:Enrico.Vassallo@esa.int><font size=3 color=blue face="Calibri"><u>Enrico.Vassallo@esa.int</u></font></a><font size=3 face="Calibri">>,
Dennis K Lee <</font><a href=mailto:dennis.k.lee@jpl.nasa.gov><font size=3 color=blue face="Calibri"><u>dennis.k.lee@jpl.nasa.gov</u></font></a><font size=3 face="Calibri">><b><br>
Subject: </b>Re: [CESG] CESG polls stucked with ADs/DADs conditions</font><font size=2 face="Calibri">
</font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Not at all. <br>
Putting conditions that cannot be accomplished means rejecting the poll.
<br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Gian Paolo<br>
<br>
Sent from my iPhone</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
<br>
On 5. Sep 2017, at 23:29, Shames, Peter M (312B) <</font><a href=mailto:peter.m.shames@jpl.nasa.gov><font size=2 color=blue face="Calibri"><u>peter.m.shames@jpl.nasa.gov</u></font></a><font size=2 face="Calibri">>
wrote:</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Gippo, et al,</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Just to be entirely clear.  My condition was to ask that the document
meet the terms and maturity status required of all documents to be sent
out for agency review.  I did not "REJECT" it, I asked that
it be completed, as required.</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Dear Massimo,</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Since the document itself says "</font><font size=2 color=red face="Calibri"><b><i>For
systems compliant with CCSDS 131.0-B-2 further work is needed</i></b></font><font size=2 face="Calibri">.
" I think it is clear that the WG understands that the document is
not yet complete.  I think it wisest to use the available time and
effort to remedy that, and when it is complete, and at an adequate level
of maturity, it should then be proposed again for agency review.</font><font size=2 face="Calibri">
</font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Best regards, Peter</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
It is up to the WG to meet the usual maturity conditions such that the
document does not include statements like that.  I think the correct
characterization is that the WG chose to WITHDRAW the document because
it is not mature, and they could not remedy that in time, and not that
it was rejected. <br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
Best regards, Peter</font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=3 face="Calibri"><b><br>
From: </b>CESG <</font><a href="mailto:cesg-bounces@mailman.ccsds.org"><font size=3 color=blue face="Calibri"><u>cesg-bounces@mailman.ccsds.org</u></font></a><font size=3 face="Calibri">>
on behalf of Gian Paolo Calzolari <</font><a href=mailto:Gian.Paolo.Calzolari@esa.int><font size=3 color=blue face="Calibri"><u>Gian.Paolo.Calzolari@esa.int</u></font></a><font size=3 face="Calibri">><b><br>
Date: </b>Tuesday, September 5, 2017 at 2:44 AM<b><br>
To: </b>Nestor Peccia <</font><a href=mailto:Nestor.Peccia@esa.int><font size=3 color=blue face="Calibri"><u>Nestor.Peccia@esa.int</u></font></a><font size=3 face="Calibri">><b><br>
Cc: </b>"</font><a href=mailto:Massimo.Bertinelli@esa.int><font size=3 color=blue face="Calibri"><u>Massimo.Bertinelli@esa.int</u></font></a><font size=3 face="Calibri">"
<</font><a href=mailto:Massimo.Bertinelli@esa.int><font size=3 color=blue face="Calibri"><u>Massimo.Bertinelli@esa.int</u></font></a><font size=3 face="Calibri">>,
Kenneth Andrews <</font><a href=mailto:kenneth.s.andrews@jpl.nasa.gov><font size=3 color=blue face="Calibri"><u>kenneth.s.andrews@jpl.nasa.gov</u></font></a><font size=3 face="Calibri">>,
Klaus-Juergen Schulz <</font><a href="mailto:Klaus-Juergen.Schulz@esa.int"><font size=3 color=blue face="Calibri"><u>Klaus-Juergen.Schulz@esa.int</u></font></a><font size=3 face="Calibri">>,
Bernie Edwards <</font><a href=mailto:Bernard.L.Edwards@nasa.gov><font size=3 color=blue face="Calibri"><u>Bernard.L.Edwards@nasa.gov</u></font></a><font size=3 face="Calibri">>,
CCSDS Engineering Steering Group - CESG Exec <</font><a href=mailto:cesg@mailman.ccsds.org><font size=3 color=blue face="Calibri"><u>cesg@mailman.ccsds.org</u></font></a><font size=3 face="Calibri">><b><br>
Subject: </b>Re: [CESG] CESG polls stucked with ADs/DADs conditions</font><font size=2 face="Calibri">
</font><font size=2 face="Calibri"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="sans-serif"><br>
Nestor,</font><font size=2 face="Calibri"> </font><font size=2 face="sans-serif"><br>
       For the SLS VCM Protocol RB</font><font size=3 face="Calibri">
</font><font size=2 face="sans-serif">it has been clarified that the SEA
Condition was actually a REJECT.</font><font size=2 face="Calibri"> </font><font size=2 face="sans-serif"><br>
SLS disagreement was expressed in mail dated </font><font size=1 face="sans-serif">08/08/2017
14:30</font><font size=2 face="Calibri"> </font><font size=2 face="sans-serif"><br>
<br>
For SLS Optical Comm Physical Layer RB</font><font size=3 face="Calibri">
</font><font size=2 face="sans-serif">the WG is working on replies to the
conditions.</font><font size=2 face="Calibri"> </font><font size=2 face="sans-serif"><br>
<br>
Regards</font><font size=2 face="Calibri"> </font><font size=2 face="sans-serif"><br>
<br>
Gian Paolo</font><font size=2 face="Calibri"> </font><font size=2 face="sans-serif"><br>
<br>
PS The relevant WG chairs are copied here for information with the request
to not do reply to all.</font><font size=2 face="Calibri"> <br>
<br>
</font><font size=1 color=#5f5f5f face="sans-serif"><br>
<br>
From:        </font><a href=mailto:Nestor.Peccia@esa.int><font size=1 color=blue face="sans-serif"><u>Nestor.Peccia@esa.int</u></font></a><font size=2 face="Calibri">
</font><font size=1 color=#5f5f5f face="sans-serif"><br>
To:        </font><font size=1 face="sans-serif">"CESG
-- CCSDS-Engineering Steering Group \(</font><a href=mailto:cesg@mailman.ccsds.org><font size=1 color=blue face="sans-serif"><u>cesg@mailman.ccsds.org</u></font></a><font size=1 face="sans-serif">\)
\(</font><a href=mailto:cesg@mailman.ccsds.org><font size=1 color=blue face="sans-serif"><u>cesg@mailman.ccsds.org</u></font></a><font size=1 face="sans-serif">\)"
<</font><a href=mailto:cesg@mailman.ccsds.org><font size=1 color=blue face="sans-serif"><u>cesg@mailman.ccsds.org</u></font></a><font size=1 face="sans-serif">></font><font size=2 face="Calibri">
</font><font size=1 color=#5f5f5f face="sans-serif"><br>
Date:        </font><font size=1 face="sans-serif">05/09/2017
11:12</font><font size=2 face="Calibri"> </font><font size=1 color=#5f5f5f face="sans-serif"><br>
Subject:        </font><font size=1 face="sans-serif">[CESG]
CESG polls stucked with ADs/DADs conditions</font><font size=2 face="Calibri">
</font><font size=1 color=#5f5f5f face="sans-serif"><br>
Sent by:        </font><font size=1 face="sans-serif">"CESG"
<</font><a href="mailto:cesg-bounces@mailman.ccsds.org"><font size=1 color=blue face="sans-serif"><u>cesg-bounces@mailman.ccsds.org</u></font></a><font size=1 face="sans-serif">></font><font size=2 face="Calibri">
</font>
<div align=center>
<hr noshade></div>
<br><font size=2 face="Calibri"><br>
<br>
</font><font size=2 face="sans-serif"><br>
<br>
Dear all,</font><font size=3 face="Calibri"> </font><font size=2 face="sans-serif"><br>
<br>
There are 6 CESG closed polls with "not yet solved" conditions.
The 6 polls are on documents to be issued for Agency Review.</font><font size=3 face="Calibri">
</font><font size=2 face="sans-serif"><br>
i.e.</font><font size=3 face="Calibri"> </font><font size=2 face="sans-serif"><br>
1.        SLS VCM Protocol RB</font><font size=3 face="Calibri">
</font><font size=2 face="sans-serif"><br>
2.        SLS Optical Comm Physical Layer RB</font><font size=3 face="Calibri">
</font><font size=2 face="sans-serif"><br>
3.        CSS Guidelines for spec of CSTS RB</font><font size=3 face="Calibri">
</font><font size=2 face="sans-serif"><br>
4.        MOIMS MO MAL Binding to ZMTP transport</font><font size=3 face="Calibri">
</font><font size=2 face="sans-serif"><br>
5.        MOIMS MO Data Product bDistribution RB</font><font size=3 face="Calibri">
</font><font size=2 face="sans-serif"><br>
6.        MOIMS MO Common Services RB</font><font size=2 face="Calibri">
</font><font size=2 face="sans-serif"><br>
<br>
It means that we have missed the opportunity to discuss the potential RIDs
at the F17 meeting in Netherlands.</font><font size=3 face="Calibri"> </font><font size=2 face="sans-serif"><br>
<br>
ciao</font><font size=3 face="Calibri"> </font><font size=2 face="sans-serif"><br>
nestor</font><font size=2 face="Calibri"> </font><font size=3 face="Courier New"><br>
This message and any attachments are intended for the use of the addressee
or addressees only.</font><font size=2 face="Courier New"><br>
The unauthorised disclosure, use, dissemination or copying (either in whole
or in part) of its<br>
content is not permitted.<br>
If you received this message in error, please notify the sender and delete
it from your system.<br>
Emails can be altered and their integrity cannot be guaranteed by the sender.<br>
<br>
Please consider the environment before printing this email.<br>
<br>
_______________________________________________<br>
CESG mailing list</font><font size=2 color=blue face="Calibri"><u><br>
</u></font><a href=mailto:CESG@mailman.ccsds.org><font size=2 color=blue face="Courier New"><u>CESG@mailman.ccsds.org</u></font></a><font size=2 color=blue face="Calibri"><u><br>
</u></font><a href="https://mailman.ccsds.org/cgi-bin/mailman/listinfo/cesg"><font size=2 color=blue face="Courier New"><u>https://mailman.ccsds.org/cgi-bin/mailman/listinfo/cesg</u></font></a><font size=2 face="Courier New"><br>
</font><font size=2 face="Calibri"><br>
</font><font size=2 face="Courier New"><br>
This message and any attachments are intended for the use of the addressee
or addressees only.</font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
The unauthorised disclosure, use, dissemination or copying (either in whole
or in part) of its</font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
content is not permitted.</font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
If you received this message in error, please notify the sender and delete
it from your system.</font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
Emails can be altered and their integrity cannot be guaranteed by the sender.</font><font size=2 face="Calibri">
</font><font size=2 face="Courier New"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
Please consider the environment before printing this email.</font><font size=2 face="Calibri">
</font><font size=2 face="Courier New"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
This message and any attachments are intended for the use of the addressee
or addressees only.</font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
The unauthorised disclosure, use, dissemination or copying (either in whole
or in part) of its</font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
content is not permitted.</font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
If you received this message in error, please notify the sender and delete
it from your system.</font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
Emails can be altered and their integrity cannot be guaranteed by the sender.</font><font size=2 face="Calibri">
</font><font size=2 face="Courier New"><br>
 </font><font size=2 face="Calibri"> </font><font size=2 face="Courier New"><br>
Please consider the environment before printing this email.</font><font size=2 face="Calibri">
</font><font size=2 face="Courier New"><br>
 </font><font size=2 face="Calibri"> </font>
<br><font size=2 face="Courier New">This message and any attachments are
intended for the use of the addressee or addressees only.</font>
<br><font size=2 face="Courier New">The unauthorised disclosure, use, dissemination
or copying (either in whole or in part) of its</font>
<br><font size=2 face="Courier New">content is not permitted.</font>
<br><font size=2 face="Courier New">If you received this message in error,
please notify the sender and delete it from your system.</font>
<br><font size=2 face="Courier New">Emails can be altered and their integrity
cannot be guaranteed by the sender.</font>
<br><font size=2 face="Courier New"> </font>
<br><font size=2 face="Courier New">Please consider the environment before
printing this email.</font>
<br><font size=2 face="Courier New"> </font>
<br>
<br><PRE>This message and any attachments are intended for the use of the addressee or addressees only.
The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its
content is not permitted.
If you received this message in error, please notify the sender and delete it from your system.
Emails can be altered and their integrity cannot be guaranteed by the sender.

Please consider the environment before printing this email.

</PRE>